The rotating drum washing machines, manufactured in two different sizes 60 and 90, by means of the upper inlet and the hinged cover, with manual movement, can be loaded for the execution of washing cycles consisting of the following automatic phases (at variable times):
Their simple use consists in placing the parts to be washed inside a rotating basket where the parts, during the washing phase, are hit by a hot detergent solution projected by spray nozzles of suitable capacity.
STANDARD EQUIPMENT | ||
---|---|---|
Hinged lid with gas springs and electric safety closure | ||
Rotating basket (Diameter: 600/900mm) | ||
Touch screen operator panel | ||
Detergent solution thermoregulation system | ||
Recirculation circuit with filtration | ||
Level controls | ||
Manual level reset valve | ||
Spraying ramps (upper, lower and side) | ||
Upper blowing ramp | ||
Coalescing extractor fan for vapour extraction | ||
Lower anti-histicide tank |
GENERAL TECHNICAL FEATURES WASHING MACHINE SERIE RB | ||
---|---|---|
. | RB 60 | RB 90 |
Material | Inox steel AISI 304 | |
Dimensions | 1300x1300x(h) 1100mm |
1600x1600x(h) 1130mm |
Tub edge height | 950 mm | 980 mm |
Basket diameter (ɸ) | 600mm | 900mm |
Max. part height to be washed | 250mm | |
Max. load | 45 daN | 80 daN |
Detergent solution tank capacity | 96 lt | 125 lt |
Softened water/demi tank capacity | 75 lt | |
Waste tank capacity | 33 lt | |
Electrical power supply | 400V – 50Hz – 3P+N+G | |
Installed electric power | 6.0 kW | 8.0 kW |
Max. Det. sol. temp. | 85°C | |
Max. rinse water temperature | 60°C | |
Pneumatic power supply | Compressed air at 6 bar, ∅ ½” | |
Water supply | Mains water, 1 bar, ∅ ½” | |
Vapour extraction flow rate | 500 mc/h | |
Weight (empty) | 450 daN | 600 daN |